Chemglaze Z-Line coatings can be used on rigid substrates such as metals, concrete and wood, or on flexible substrates such as rubber, plastics, and leather. Because of their excellent resistance to wear, abrasion and chemicals, they are particularly useful in heavy industrial and aggressive atmospheres where protection is a prime consideration. These coatings are recommended [...]

Resilient adhesive with excellent adhesion to acrylic. Clear, low viscosity UV cured adhesive produces clear, bubble-free bondlines.
Viscosity (20 rpm)

3099 - 150 cp (nominal)
3099-T - 10,000 cp
3099-VT - 15,000 cp

Other Features:

Solvent Content: 100% SolidsDurometer Hardness: D-75
Tensile at Break: 4000 psi
Elongation at Break: 95%
Appearance: Straw/Clear

UV light and/ or visible light curing; dispenses easily and cures quickly for precise quantity and placement of adhesive; bonds generally exceed the strength of substrates bonded, including PVC alloys, which resist most other bonding methods.
Viscosity (20 rpm)

3094 - 1000 cp nominal
3094-T - 8000 cp nominal
3094-Gel - 25,000 cp nominal
3094-Gel-F - 25,000 cp nominal

Other Features:

Solvent [...]

Low Stress; very fast curing, flexible UV adhesive; resilient bonds exhibiting high flexibility to minimize or eliminate bond line stresses.

Solvent Content: 100% Solids
Viscosity: 1200 cp (nominal)
Durometer Hardness: A-65
Tensile at Break: 300 psi
Elongation at Break: 225%
Appearance: Clear/Straw Liquid

UV and / or visible light curing; dispenses easily to allow precise quantity and placement of adhesive; bonds generally exceed the strength of substrates bonded, including PVC alloys, which resist most other bonding methods.

Solvent Content: 100% Solids
Viscosity (20 rpm): 4000-8000 cp
Durometer Hardness: D-60
Tensile at Break: 3000 psi
Elongation at Break: 200%
Appearance: Clear

Clear, hard bonds; cure with UV light or activator; bonds to glass, metal, phenolic, filled nylon, ferrite and ceramic.

Solvent Content: 100% solids
Viscosity: 605 VLV-150 cp nominal  /  605-600 cp  /  605-T-2000 cp  /  605-Gel-25,000 cp
Durometer Hardness: D-70
Tensile at Break: 4300 psi
Elongation at Break: 20 %

Tensile Compression Shear

Glass-to-Glass: 2300 psi (glass shatters)
Glass-to-Metal: 1700 psi (glass shatters)

Resists yellowing, vibration and thermal shock; optically clear; general purpose bonding; potting and sealing; for large area bonding.

Composition: 100% solids
Viscosity: 429-2500 cp  /  429-T-5000 cp  /  429-Gel   20,000 cp
Durometer Hardness: D-60
Tensile at Break: 3000 psi
Elongation at Break: 120 %

Tensile Compression Shear

Glass-to-Glass: 2300 psi (glass shatters)
Glass-to-Metal: 1700 psi (glass shatters)

Dishwasher safe; water clear; low viscosity; exceptional tensile strength; good vibration and impact resistance.

Composition: 100% solids
Viscosity(@20 rpm): 4000 cp
Durometer Hardness: D-80
Tensile at Break: 6200 psi
Elongation at Break: 7.3 %
Linear Shrinkage: 1.9%

Make quieter motors with assembly adhesives that cure with both activator and UV light. Dymax resins are easy to integrate into automated application processes and are ideal for DC motor assembly, tab sealing, coil terminating, strain relief, wire tacking, core bonding and balancing and unitizing armature windings. Their fast fixture rate makes them excellent for [...]

Bonds to a variety of metal surfaces, glass, ceramics, filled Nylon, thermoset plastics and epoxy board. Bonds for rapidly between close fitting substrates upon contact of adhesive with Activator 535-A or 500-E. Dymax 846-Gel exhibits good thermal shock characteristics and excellent adhesion to a wide variety of plated surfaces. Formulated as a low volatile adhesive, [...]

Multi-Cure 652 Rev A Series adhesives are tough, flexible UV/Visible curing resins. The 652 Series have good adhesion to many metals, glass, ceramic and thermoset plastics. Their ability to resist moisture, withstand thermal shocks makes them candidates for many sealant applications. 652 Series can be cured with UV or visible light, heat, or pre-applied activator.
Viscosity:

652 [...]

Designed to bond automotive metal latches to windows and bondind CR-39 plastic lenses to eyeglass frames. Multi-Cure 625 REV. A Series has good adhesion to many metals, glass, ceramic and thermoset plastics. Can be cured with UV light, heat, or pre-applied activator.
Viscosity:

625 Rev. A - 5000 cp (nominal)
621-SV01-Rev. A - 10,000cp (nominal)
625-T-Rev.A - 22,000 (nominal)
625-Gel [...]

High tensile strength; suited for rigid application; clear, hard, bonds to glass, metal, phenolic, filled Nylon, ferrite, ceramic and other materials. Multi-cure 621 Series can be cured with UV light, or pre-applied activator.
Viscosity:

621 - 150 cp (nominal)
621-T - 3500cp (nominal)
621-VT - 11,000 (nominal)
621-Gel - 25,000 (nominal)

Other Features:

Solvent Content: 100% Reactive solids
Durometer Hardness: D-75
Tensile at Break: [...]

Clear, hard bonds; cure with UV light or activator; bonds to glass, metal, phenolic, filled Nylon, ferrite and ceramic.
Viscosity

605-VLV - 150 cp (nominal)
605 - 600 cp (nominal)
605-T - 2000 (nominal)
605-Gel - 25,000 (nominal)

Other Features:

Solvent Content: 100% Reactive solids
Durometer: D-70
Tensile at Break: 4300 psi
Elongation at Break: 20%

Tensile Compression Shear

Glass to Steel: 4400 psi (exceeds strength of [...]

Wipe-on Activator 501-E when pre-applied to metallic, plated, ceramic, glass or substrates, rapidly and completely cures high strength Dymax 800 and 600 series structural adhesives in gaps from less than 1 mli to 20 mils. Pre-applied parts can be joined immediately or after 24 hours of open time.
Download data sheet