M6 Semi-Permanent Water-Based Release Agent
EZ-Kote is a non-transferring and environmentally friendly water-based mold release. EZ-Kote releases the molded product easily, allowing for immediate mold prep which aids in decreasing shot cycle time. EZ-Kote is available in several formulations to meet the most exacting needs in mold release applications. The M Series is formulated for metal [...]

Ease Release 400 is a highly efficient release agent designed to release polyurethane elastomers, Thiokol rubbers, EPDM and other synthetic elastomers from aluminum, chrome, epoxy, polyester, rubber and steel molds.
FEATURES
Ease Release 400 is easy to apply, fast drying and effective over a broad temperature range from 70°F to 500°F. Ease Release 400 provides excellent release [...]

Ease Release 300 is a high performance, production proven release agent formulated for polyurethane elastomers and epoxy resins along with excellent release of polyurethane elastomers and microcellular foams. Ease Release 300 leaves very little build-up on the molds resulting from isocyanate or epoxy reactions, while maintaining part cleanability with common degreasing solvents. Cleaned parts molded [...]

Ease Release 200 is an excellent general purpose release agent for making molds and casting parts. This product will release polyurethane elastomers, polyurethane foam, epoxy resin, polyester resins, platinum silicones, rubber and thermoplastic polymers. Ease release 200 is effective on aluminum, chrome, platinum silicone, epoxy, rubber and steel molds.
FEATURES
Ease Release 200 is easy to apply, [...]

The 21st Century solution for silicone rubber mold release applications featuring unmatched level of slip, mold cleanliness, and maximum releases.RS1 is used on silicone o-rings, spark plug boots, seals, gaskets, etc. and can be very effective on all other rubber parts that don’t have a tearing problem.

Prevents build-up, allowing molds to stay cleaner up to [...]

The 21st Century solution for rubber mold release applications featuring unmatched level of slip, mold cleanliness, and maximum releases.Provides unequalled ease of release resulting in a cleaner finished product, less scrap and more pulls per mold for superior cost savings.

Prevents build-up, allowing molds to stay cleaner up to 10 times longer.
Provides unsurpassed ease of release [...]

Ez-Kote MLEX-2 is a non-transferring vapor deposited, mold life extension coating agent designed specifically to bond to RTV Condensation and Platinum Silicone Molds. Transparent MLEX-2 is formulated to shield and protect silicone molds from urethane and epoxy reactions during molding. Our new polymer formulation extends library ife and resin flow while radically decreasing the degradation [...]

Chemlease PMR EZ is a unique semi-permanent mold release system developed specifically for the composites industry, for use where a high quality finish is required.
Benefits:

Multiple releases between applications
Easy to apply
Eliminates the use of wax
Reduces labor time and costs
Provides excellent gloss
High temperature stability
Does not build up on the mold [...]

Chemlease Mold Cleaner EZ is a special blend of solvents designed to remove wax and contaminants from composite molds. Chemlease Mold Cleaner EZ is ideal for preparing composite mold surfaces for the application of Chemlease mold sealers and releasants. It is also excellent for cleaning brushes and equipment.
Available in quarts, gallons, pails and drums.Chemlease 15 [...]

Chemlease 88 is a special non-silicone dry lubricant based on a fluorocarbon telomere dispersion. Chemlease 88 works very effectively with a wide variety of molding resins and provides a clean, dry non-oily release film with excellent slip characteristics.

88 Aerosol – Formulated for easy aerosol application. The carriers in Chemlease 88  Aerosol evaporate very fast and [...]

Chemlease 75 is a unique semi-permanent mold release system developed specifically for the Marine and Cultured Marble, Class A applications.
Benefits:

Multiple releases between applications
Easy to apply
Eliminates the use of wax
Reduces labor time and costs
Allows use of most standard fine line/masking tapes
Excellent for use on large parts where pre-release may be [...]

Chemlease 66 provides excellent release for hot and cold molded/cast polyurethane elastomers, skinned polyurethane and high density urethane foams. Chemlease 66 is also an excellent release for epoxy resin and permits easy cleaning of parts when necessary.

66 Aerosol – Formulated for easy to use aerosol application. The carriers in Chemlease 66 Aerosol evaporate very quickly [...]

Chemlease 41-90 is a high-slip release agent designed for non-cosmetic parts and multiple releases. 41-90 will mirror the surface of the mold closely, facilitating replication of highly diverse surfaces with a single release agent. High slip version of 41; primarily for closed molding of abrasive or low draft parts, where a matte or satin finish [...]

Chemlease 15 Sealer EZ is a high performance sealer developed to condition and seal mold surfaces, reduce mold porosity and act as a base for new or reconditioned molds.
Benefits

HAPs free
Reduces porosity problems
Provides an excellent base coat for all types of release agents
Compatible with fiberglass, aluminum, steel, and most solid or dense surfaces
Shortens break-in time
Reduces labor [...]

A PTFE Dispersion of white, waxy, low molecular weight polymer. For high temperature compression molding.

Lubricant
Release Agent
Dry Spray

Use for Rigid and semi-rigid polyurethanes, Epoxies, Polyesters, TPR and other Thermosetting Resins and integral skin molded parts.

Silicone based
Heavy wet spray
Long Lasting

Download data sheet

For all types of Injection/Compression Molded Plastics. No buildup on mold cavities.

Paintable
Fast Evaporating
Economical
NonSilicone

For all Thermoplastic Resins/Waxes where post decorating is required of parts being molded.

Paintable
Fast Evaporating
Economical

For Injection, RIM, Rotational Molders, Extruders and Vacuum Formers.

General Purpose
Economical
3% Silicone

Axson 870 is a sprayable wax mold release designed for castings and low pressure RIM applications. It is suitable for use up to 212 F. It is not suited for use with epoxy laminating resins.