The Series 160A mixing nozzle accepts ProTips and, thus, combines the design benefits of the disposable TAH Series 160 static mixer with the ability to change the geometry of the mixer outlet. The mixers are molded with the TAH “A” tip which allows the user to either mix and apply adhesive in a single small [...]

With conventional meter/mix manifolds, the reactive materials meet within the manifold before the mixer. If the materials are allowed to gel, the manifold will plug and must be disassembled. This can be a time-consuming and expensive task.
TAH manifolds, in conjunction with the Series 160 mixers, eliminates this problem. The mixing nozzle has a bell inlet. [...]

Retaining Nut
Aluminum retaining nuts are available to hold the Series 141, 160, 160A and 442 mixing nozzles onto adapters, manifolds, and valves. These retaining nuts are used when a metal jacket is not required.

PART NO.
THREAD
DESCRIPTION
MIXING NOZZLE
Part No.

165-36N
TAH Standard 7/8-14
Aluminum Nut
160-4XX & 160-6XX

165-36N-A-9S
Alternative 7/8-9
Aluminum Nut
160-4XX & 160-6XX

165-37N
TAH Standard 7/8-14
Aluminum Nut
160-7XX &160-8XX

165-37N-A-9S
Alternative 7/8-9
Aluminum Nut
160-7XX &160-8XX

165-38N
TAH Standard 7/8-14
Aluminum [...]

STATOMIX® MS Series disposable plastic static mixers, when used with meter mix equipment, provide a low cost solution for 2-component mixing. The mixer element is molded of polyacetal to withstand the higher pressures of meter mix machines.
MS Series static mixers are also available with support washers. The washer will prevent the elements from extruding out [...]

STATOMIX® MR series disposable plastic static mixers are designed for use with meter mix and dispense equipment. The MR static mixer provides an inexpensive solution for the dynamic mixing of low viscosity, 2-component adhesives. In dynamic mixing, unlike that of motionless mixing, the elements within the mixer rotate. This makes the MR Series ideally suited [...]

STATOMIX® ME series disposable plastic static mixers, when used with meter mix equipment, provide a low cost solution for 2-component mixing. The mixer element is molded of polyacetal to withstand the higher pressures of meter mix machines.
ME Series static mixers are also available with support washers. The washer will prevent the elements from extruding out [...]

STATOMIX® MC and MCX Cartridge static mixers were developed for the MIXPAC® 200 and MIXPAC® 400 SYSTEMS. The unique element design achieves proper mixing with minimal resistance, which is highly beneficial for manually powered dispensing. In addition, the MCX version has a patented design that centers the smaller stream of catalyst in 4:1 and 10:1 [...]

The STATOMIX® MB Series cartridge static mixers were developed for the MIXPAC® S-50 System. The unique interface with separated outlets between cartridge and static mixer eliminates the possibility of cross contamination and avoids plugged cartridges. An enhanced design of the mixer allows for the mixing and dispensing of higher viscosity adhesives. Higher dispensing pressures also [...]

The STATOMIX® MA Series static mixers feature simple twist-lock mounting. The static mixers’ first element automatically aligns itself precisely with the dividing wall of the MIXPAC® 50 cartridge, separating Part A and Part B. As a result of this patented design, the MA static mixer prevents curing at the interface of the cartridge.
The MA Series [...]

STATOMIX® FM Series flexible static mixers were developed for 2-component varnishes and other low viscosity materials. The non-rigid mixer housing is made from a high strength nylon that is resistant to moisture absorption. These mixers are not recommended for high pressure applications or for mixing high viscosity materials.
FM Series static mixers have a polypropylene element [...]