Threadlockers
Speeds cure of Permatex® Threadlockers, Thread Sealants, Retaining Compounds and anaerobic Gasket Makers. Recommended for use during cold weather for improved adhesion. General-purpose solvent for cleaning and preparing parts and surfaces Download data sheet Medium/High strength threadlocker for general-purpose applications. Especially well-suited for 1/4 inch to 3/4 inch (6mm to 20mm) fasteners that have a slight oil film. Prevents vibration loosening. Prevents vibration loosening Download data sheet A permanent, high strength threadlocker that is applied to fasteners 3/8 inch to 1 inch (10mm to 25mm) in size before assembly. Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions. Localized heating and hand tools are required to separate parts. Mil-Spec (S-46163A) Type II, Grade O. Prevents vibration [...] A low viscosity threadlocking liquid that wicks along the threads of preassembled fasteners to secure them in place. Since it is applied after assembly, preventive maintenance procedures are simplified. Ideal for fasteners ranging from #2 to 1/2 inch (2.2 to 12mm) in size. Localized heating and hand tools are needed for disassembly. Mil-Spec (S-46163A) Type [...] The GEL SQUEEZE™ applicator puts the Threadlocker where you want it…on the part! Gel formula provides “liquid-reliability” without drips, globs, mess or waste. High strength threadlocker for heavy-duty applications. Especially well suited for permanently locking studs. Locks against vibration loosening. Requires extra effort or special tools for removal. Threadlocker GEL - Blue The patent-pending GEL TWIST™ pin-point applicator puts the Threadlocker where you want it…on the part! Gel formula provides “liquid-reliability” without drips, globs, mess or waste. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4 inch to 1 inch (6mm to 25mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks [...] All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4 inch to 3/4 inch (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Mil-Spec (S-46163A) Type II, [...] Low strength threadlocker designed for fasteners under 1/4 inch (6mm) that require occasional adjustment. Removable with hand tools for easy disassembly. Mil-Spec (S-46163A) Type II, Grade M. Prevents vibration loosening Download data sheet The patent-pending GEL TWIST™ pin-point applicator puts the Threadlocker where you want it…on the part! Gel formula provides “liquid-reliability” without drips, globs, mess or waste. High strength threadlocker for heavy-duty applications. Especially well suited for permanently locking studs. Locks against vibration loosening. Requires extra effort or special tools for removal. Threadlocker Gel - Red The GEL SQUEEZE™ applicator puts the Threadlocker where you want it…on the part! Gel formula provides “liquid-reliability” without drips, globs, mess or waste. High strength threadlocker for heavy-duty applications. Especially well suited for permanently locking studs. Locks against vibration loosening. Requires extra effort or special tools for removal. Threadlocker GEL - Red High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially well suited for permanently locking studs. Locks against vibration loosening. Removable with heat and hand tools. Mil-Spec (S-46163A) Type I, Grade K. Prevents vibration loosening Download [...] A solvent-based activator that can be used to speed the cure of Permatex® anaerobic products. Recommended for applications with inert surfaces or passive metals and with large bond gaps. Ideal activator when temperatures are below room temperature, especially when cure conditions are below 59° F (15°C.). Speeds cure of Permatex® anaerobics |
|
