Static Mixers

ConProTec MS Series Static Mixers

STATOMIX® MS Series disposable plastic static mixers, when used with meter mix equipment, provide a low cost solution for 2-component mixing. The mixer element is molded of polyacetal to withstand the higher pressures of meter mix machines.

MS Series static mixers are also available with support washers. The washer will prevent the elements from extruding out the end of the housing when working with high pressure applications.

MS static mixers are suitable for all types of meter, mix and dispensing systems. Check with our sales department for the correct static mixer for your equipment.

NOTE: The only functional difference between ME series and MS series is the inner diameter of the bell inlet housing: ME = .625 inches and MS = .657 inches

Technical Data
Outer Housing: Polypropylene
Elements: Polyacetal
Retaining Nuts: 7/8″ - 9 thread or 7/8″ - 14 thread
I.D. Bell Inlet Housing: 0.657 inches

Part No. Inner Dia. I.D. (mm) Number of Elements Outer Dia. O.D. (mm) Length L (mm) Nozzle Dia. A (mm) Approx. Content Vol (ml)
MS 05 - 24 5 24 8 149 1.5 2.3
MS 05 - 32 5 32 8 188 1.5 2.8
MS 06 - 24 6.35 24 10 185 1.9 4.2
MS 06 - 32 6.35 32 10 234 1.9 6.6
MS 06 - 48 6.35 48 10.5 334 2.2 10
MS 06 - 56 6.35 56 10.5 378 4.5 11
MS 08 - 24 8 24 12 223 2.4 8.5
MS 08 - 32 8 32 12 287 2.4 11.5
MS 10 - 24 10 24 14 276 3 16
MS 10 - 32 10 32 14 352 3 23
MS 1012 - 0832 10.00 - 8.00 12 + 32 14.00 - 12.00 409 2.4 19
MS 13 - 24 13 24 17 293 4 27
MS 13 - 24 - L 13 24 17 350 4 27
MS 13 - 32 13 32 17 379 4 34.5
MS 13 - 32 - L 13 32 17 451 4 34.5
MS 1312 - 1032 13.00 - 10.00 12 + 32 17.00 - 14.00 499 7.2 37.5

Retaining Nuts for MS Series Static Mixers

Part Number Description For I.D. (mm) Thread
UM 08 - PA PA 6, Beige 5 - 8 7/8″ - 9 Thread
UM 10 - PA PA 6, Beige 5 - 10 7/8″ - 9 Thread
UM 13 - PA PA 6, Beige 13 7/8″ - 9 Thread
UM 10-14-PA PA 6, Grey 5-10 7/8″ - 14 thread
UM 13 - 14 - PA PA 6, Grey 13 7/8″ - 14 thread