Chembar

BCC MB8250 Aluminum Tooling Plank

admin — Thu, 04 Mar 2010 15:44:45 +0000

BCC Products now offers a truly metal-like machineable modeling plank for today’s demanding applications. MB 8250 is an aluminum filled product that is dimensionally stable and exhibits unsurpassed machinable properties. With the BC 8250 tooling plank you can see in some applications a significant savings on billet aluminum tooling materials.

MB8250 has these great qualities:
* Excellent machineability
* Low dust emission
* No shrinkage
* Low moisture absorption
* Excellent surface detail reproduction
* Excellent surface finish

Features:
Density(lbs/ft3; gms/cm3): 99.84/1.60
Hardness: 85D
Heat Distortion (°F): 175
CTE (in/in/°F): 39.239×10-6
Color:Dark Gray
Adhesive: BC5003 Clear

Sizes:
2″,3″x16″x60″

Tech Datasheet
MB8250 Product Flyer

BCC MB5000 High Density Tooling Plank

admin — Thu, 04 Mar 2010 15:42:21 +0000

BCC Products now offers a revolutionary state-of-the-art machineable high density board for today’s demanding tooling requirements. MB 5000 is an extremely tough, high impact Urethane Plank, that can be used for metal forming as well as nickel plating mandrels.

MB5000 has these great qualities:
* Excellent machinability
* Low dust emission, mostly shavings
* No shrinkage
* Excellent impact and wear resistance
* Excellent surface detail reproduction
* Excellent surface finish

Features:
Density(lbs/ft3; gms/cm3): 100/1.6
Hardness: 88D +2
Heat Distortion (°F): 195
Tg (°F): 215
CTE (in/in/°F): 2.29×10-5
Color:White
Adhesive: BC5003 Clear

Sizes:
2″-4″x16″x60″
2″-3″x24″x60″

Tech Datasheet
MB5000 Product Flyer

BCC MB4000 Foundry Plank

admin — Thu, 04 Mar 2010 15:39:33 +0000

BCC Products now offers a revolutionary state-of-the-art machineable foundry plank for today’s demanding tooling requirements. MB4000 Red is an extremely tough, high impact Urethane Plank, that can replace aluminum and other metals for many foundry applications.

MB4000 has these great qualities:
* Excellent machinability
* Low dust emission, mostly shavings
* No shrinkage
* Excellent impact and wear resistance
* Excellent surface detail reproduction
* Excellent surface finish
* Polishable to a high gloss

Features:
Density(lbs/ft3; gms/cm3): 71/1.14
Hardness: 86D
Tg (°F): 240
Heat Distortion (°F): 214
CTE (in/in/°F): 35.60×10-6
Color:Red
Adhesive: BC5003 Red
Repair: DP-11-75

Sizes:
2″-4″x16″x60″
1″-6″x24″x60″

Tech Datasheet
MB4000 Product Flyer

BCC MB3500 Fixture Plank

admin — Thu, 04 Mar 2010 15:36:34 +0000

BCC Products now offers a revolutionary state-of-the-art machinable fixture plank for today’s demanding tooling requirements. MB 3500 is an extremely tough, high impact Urethane Plank, that can replace aluminum and other metals for many foundry applications.

MB3500 has these great qualities:
* Excellent machinability
* Low dust emission, mostly shavings
* No shrinkage
* Excellent impact and wear resistance
* Excellent surface detail reproduction
* Excellent surface finish

Features:
Density(lbs/ft3; gms/cm3): 48/77
Hardness: 73D
Tg (°F): 215
Heat Distortion (°F): 200
CTE (in/in/°F): 29.00×10-6
Color: Lt. Gray
Adhesive: BC5003 Clear
Repair: BC4570

Sizes:
2″-4″x16″x60″
1″-6″x24″x60″

Tech Datasheet
MB3500 Product Flyer

BCC MB2001 Model and Tooling Plank

admin — Thu, 04 Mar 2010 15:33:34 +0000

Model and Tooling Plank MB 2001 is a dense, highly machineable, dimensionally stable tooling plank for today’s CNC machining applications. As an advancement over similar products on the market, MB 2001 yields low dust emission during machining, less abrasiveness to CNC cutters, and affords the user a highly defined surface finish.

MB2001 has these great qualities:
* Excellent machinability
* Low dust emission
* No shrinkage
* Low moisture absorption
* No grain
* Excellent surface finish

Features:
Density(lbs/ft3; gms/cm3): 46.5/74
Hardness: 68D
Tg (°F): 172
Tensile strength: 3,800
CTE (in/in/°F): 4.68×10-6
Color: Mahogany (Brown)
Adhesive: DP-11-88
Repair: BC4578

Sizes:
2″,3″,4″x16″x60″
1″,2″,3″,4″,6″x24″x60″

Tech Datasheet
MB2001 Product Flyer

BCC MB1300 Polyurethane Foam Tooling Board

admin — Thu, 04 Mar 2010 15:30:53 +0000

“Mahogany”
MB 1300 is a Mahogany colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1300 is medium low density foam of approximately 30lbs/ft3 board. Easily cut using CNC machining equipment the MB 1300 is perfectly suited for visual master models, architectural design models as well as design verification and prototype tools.

MB1300 has these great qualities:
* Excellent machinability
* Very little abrasion
* No shrinkage
* Excellent at high speed cutting
* Excellent surface finish
* Exceptional dimensional stability

Features:
Density (lbs/ft3): 31
Hardness (Shore D): 58
Tensile Strength (psi): 1,250
Flexural Strength (psi): 2,400
Service Temp (min/max): -300/+195
Compressive Strength: 2,200
CTE (in./in./°F): 33 x 10-6
Color: Mahogany
Adhesive: Dp-11-88
Repair: BC4578

Sizes:
2″,4″,x24″x60″

Tech Datasheet
Foam Product Flyer

BCC MB1200 Polyurethane Foam Tooling Board

admin — Thu, 04 Mar 2010 15:25:07 +0000

Available in “Apricot or Pink”
MB 1200 is an rigid closed-cell polyurethane foam tooling and modeling board. MB 1200 is low density foam of approximately 20lbs/ft3 board. Easily cut using CNC machining equipment or by hand the MB 1200 is perfectly suited for temporary master models, architectural design models, foundry patterns as well as design verification and prototype tools.

MB1200 has these great qualities:
* Easily machined or hand carved
* Very little abrasion
* No shrinkage
* Excellent at high speed cutting
* Excellent surface finish
* Exceptional dimensional stability

Features:
Density (lbs/ft3): 20
Hardness (Shore D): 40
Tensile Strength (psi): 895
Flexural Strength (psi): 1,330
Service Temp (min/max): -300/+195
Compressive Strength: 1,140-1,130
CTE (in./in./°F): 33 x 10-6
Adhesive: DP-11-83

Sizes:
2″,4″,6″,8″x24″,48″x96″

Color in photos may not represent the actual color of boards.

Tech Datasheet
Foam Product Flyer

BCC MB1150 Polyurethane Foam Tooling Board

admin — Thu, 04 Mar 2010 15:21:24 +0000

“Avacado”
MB 1150 is an Avocado colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1150 is low density foam of approximately 15lbs/ft3 board. Easily cut using CNC machining equipment or by hand the MB 1150 is perfectly suited for temporary master models, architectural design models, foundry patterns as well as design verification and prototype tools.

MB1150 has these great qualities:
* Easily machined or hand carved
* Very little abrasion
* No shrinkage
* Excellent at high speed cutting
* Excellent surface finish
* Exceptional dimensional stability

Features:
Density (lbs/ft3): 15
Hardness (Shore D): 30
Tensile Strength (psi): 600
Flexural Strength (psi): 780
Service Temp (min/max): -300/+195
Compressive Strength: 560-590
CTE (in./in./°F): 33 x 10-6

Sizes:
2″,4″,6″,8″x24″,48″x96″

Tech Datasheet
Foam Product Flyer

BCC MB1100 Polyurethane Foam Tooling Board

admin — Thu, 04 Mar 2010 15:18:49 +0000

“Olive/Grey”
MB 1100 is an Olive colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1100 is low density foam of approximately 10lbs/ft3 board. Easily cut using CNC machining equipment or by hand the MB 1100 is perfectly suited for temporary master models, architectural design models, foundry patterns as well as design verification and prototype tools.

MB1100 has these great qualities:
* Easily machined or hand carved
* Very little abrasion
* No shrinkage
* Excellent at high speed cutting
* Excellent surface finish
* Exceptional dimensional stability

Features:
Density (lbs/ft3): 10
Hardness (Shore D): 20
Tensile Strength (psi): 350
Flexural Strength (psi): 380
Service Temp. (min/max): -300/+195
Compressive Strength (psi): 280
CTE (in./in./°F): 33 x 10-6

Sizes:
2″,4″,6″,8″x24″,48″x96″

Tech Datasheet
Foam Product Flyer

BCC EB6200 High-Temp Epoxy Tooling Board

admin — Thu, 04 Mar 2010 15:08:59 +0000

“325°F Epoxy Board”

BCC Products, Inc/Blehm Plastics announces their newest tooling board for the composites industries. BCC Products, Inc/Blehm Plastics have just developed their EB6200 a high-temperature epoxy tooling board. Built to the exacting standards of all BCC Products, Inc/Blehm Plastics product line the new EB6200 high-temperature tooling board is ideal for those using prepreg in construction of tools for composite parts. After extensive testing the EB6200 has shown that e ven at the temperature range of 325oF the board shows little effects.

Available in 2, 4, 6”x 24”x60” dimensions the EB6200 has been developed to fit the need of those in the aerospace, motorsport and automotive industries. The material has excellent aspect and cutting performance and shaves and creates little dust to save on cutting tools and clean-up after cutting.

The EB6200 has a shore hardness of 72D and a density in the 47lb/ft3 it is becoming the favorite among epoxy board users. BCC Products, Inc/Blehm Plastics has been a leader in innovative and performance products for over a combined 80 years and the EB6200 is no exception.

Features:

Density(lbs/ft3; gms/cm3): 47/0.76

Hardness: 72D

Heat Distortion (°F): 300

Glass transition (Tg °F): >325

CTE (in/in/°F): 2.1×10-5

Color: Brown

Sizes:

2″,4″,6″x24″x60″

Tech Datasheet

EB6200 Product Flyer